Machining Solution for Mold Making
Countersink solutions tailored for the Mold Making industry, solving your machining pain points
⚠️ Common Mold Making Pain Points
High Material Hardness
Mold steel at HRC50-60 wears standard tools out quickly
Frequent Edge Chipping
High impact on hard materials chips brittle standard edges easily
Low Machining Efficiency
Standard tools need very low speed and feed on hard materials
✅ Lihao Technology Solutions
Tough Cobalt HSS
HRC67 with high cobalt content - hard yet tough, no chipping on mold steel
TiAlN Composite Coating
HV3000 coating - heat and wear resistant, 3x life on hard materials
Optimized Edge Design
0.05mm edge chamfer boosts impact resistance 50% - no chipping on hard machining
Recommended Products
📊 Recommended Cutting Parameters
| Material | Mold steel / hardened steel HRC50-60 |
| Common angles | 60/82/90/100/110/120 degrees (per screw head) |
| Speed and feed | Adjust per material/machine/tool size; start slow, then increase |
🏆 Customer Cases
Severe chipping on hardened steel - 20 parts per tool, low efficiency
Lihao cobalt HSS countersinks - tough, no chipping, 80 parts per tool, 3x efficiency
Need Mold Making countersinks?
Lihao Technology engineers provide one-on-one selection guidance, 48-hour response, 7-day custom manufacturing delivery
WeChat Consultation
WeChat ID: 15338372359
Phone: 15338372359(same as WeChat)